GENERAL INFORMATION
WARNINGS
Use load securing straps to an
approved standard, e.g. DIN.
Make sure that you secure all loose
items properly.
Place luggage and other loads as low
and as far forward as possible within
the luggage or loadspace.
Do not exceed the maximum front
and rear axle loads for your vehicle.
Do not exceed the maximum gross
vehicle weight.
Do not place solid objects outside
the loadspace area for example
timber and sheet material.
Note: The center of the payload should be
located within the wheelbase of the vehicle.
Note: Avoid one sided load distribution.
Note: Uneven load distribution could result
in unacceptable handling and braking
characteristics.
LUGGAGE COVERS
WARNING
Do not place objects on the luggage
cover.
Everest (TEC), EB3B-19G219-YAA enAUS
Load Carrying
E112571
Pull out the cover until it locks.
E112572
Release it from the retaining points by
pressing below the handle. Roll it slowly
back into the case.
180