Cruise Control - Ford EVEREST 2015 Owner's Manual

Adaptive Cruise Controls
E
A
D
E206151
A On, off and cancel
B Set speed increase and resume
C Set speed and speed decrease
D Gap increase
E Gap decrease
Switching the System On
Press and release the Adaptive Cruise
Control CNCL/OFF button.
E144529
E164805
The cruise control indicator, SET mph
(kph), the current gap setting indicator
and Standby displays in the instrument
cluster.
Everest (TEC), EB3B-19G219-YAA enAUS

Cruise Control

Setting the Adaptive Cruise Speed
1. Drive to desired speed.
2. Press and release SET- or RES+.
3. The information display shows a green
indicator light, current gap setting and
desired set speed.
4. Take your foot off the accelerator
pedal.
B
C
E164805
5. When the system detects a vehicle in
front of you, it will be displayed above
the horizontal bars.
Note: When adaptive cruise control is
active, the set speed displayed in the
information display may vary slightly from
the speedometer.
Changing the Set Speed
• Press and release SET- or RES+. The
set speed changes in 5 km/h or
2 km/hincrements depending on your
vehicle.
• Press the accelerator or brake pedal
until you reach the desired speed. Press
and release SET- or RES+.
• Press and hold SET- or RES+. Release
the control when you reach the desired
speed.
The system may apply the brakes to slow
the vehicle to the new set speed. The set
speed displays continuously in the
information display when the system is
active.
159