Creating A Mykey - Ford EVEREST 2015 Owner's Manual

WARNING
Do not set MyKey maximum speed
limit to a limit that will prevent the
driver from maintaining a safe speed
considering posted speed limits and
prevailing road conditions. The driver is
always responsible to drive in accordance
with local laws and prevailing conditions.
Failure to do so could result in accident or
injury.
• Various vehicle speed minders can be
set. Once you select a speed, it will be
shown in the display, followed by an
audible tone when the preselected
vehicle speed is exceeded.
• Audio system maximum volume of
45%. A message will be shown in the
display when you attempt to exceed
the limited volume. Also, the
speed-sensitive or compensated
automatic volume control will be
disabled.
• Always on setting. When this is
selected, you will not be able to switch
off Advance Trac or traction control,
Emergency Assist, parking aid, lane
keeping alert or the do not disturb
feature (if your vehicle is equipped with
these features).
Message
Settings
MyKey
Create MyKey
When prompted, hold the OK button until
you see a message informing you to label
this key as a MyKey. The key will be
restricted at the next start.
Everest (TEC), EB3B-19G219-YAA enAUS
MyKey

CREATING A MYKEY

Use the information display to create a
MyKey:
1. Insert the key you want to program into
the ignition. If your vehicle is equipped
with a push-button start, place the
intelligent access transmitter into the
backup position. The location of your
backup position is in another chapter.
See Creating a MyKey (page 33).
2. Switch the vehicle on.
3. Access the main menu through the
information display controls. Use the
arrow keys to get to the following menu
selections:
Action and Description
Press the OK button or the right arrow key.
Press the OK button or the right arrow key.
Press the OK button or the right arrow key.
MyKey is successfully created. Make sure
you label it so you can distinguish it from
the admin keys.
You can also program configurable
settings for the key(s). See
Programming/Changing Configurable
Settings.
33