Using Sync With Your Phone - Ford EVEREST 2015 Owner's Manual

Menu Item
Bluetooth on
Set defaults
Master reset
Install on SYNC
System info
Voice settings
Browse USB
USING SYNC
PHONE
Pairing a Cell Phone For the First
Time
Note: You must switch the ignition and
radio on.
Everest (TEC), EB3B-19G219-YAA enAUS
SYNC
Check or uncheck this option to turn the Bluetooth interface
of the system on or off. Select this option then press the OK
button to change the option's status.
This selection does not erase your indexed information
(phonebook, call history, text messages and paired devices).
Select this option and confirm when prompted in the audio
display. Return to the factory default settings.
Completely erase all information stored on the system
(phonebook, call history, text messages and paired devices)
and return to the factory default settings.
Select this option and confirm when prompted in the audio
display. The display indicates when complete and the system
takes you back to the previous menu.
Install applications or software updates you have down-
loaded.
Select this option and confirm when prompted in the audio
display. There must be a valid SYNC application or update
available on the USB thumb drive in order to finish an
installation successfully.
Display the system's version numbers as well as its serial
number.
Press the OK button to select.
The voice settings submenu contains various options. See
Using Voice Recognition (page 288).
Browse the actual menu structure of the connected USB
device. Press the OK button and use the up or down arrows
to scroll through the folders and files. Use the left or right
arrows to enter and leave a folder. Media content can be
directly selected for playback from this menu.
WITH YOUR
Action and Description
1. Make sure the Bluetooth feature on
your cell phone is switched on before
starting the search. Refer to your cell
phone's manual if necessary.
2. Press the PHONE button. When the
audio display indicates that no phones
are paired, select the option to add.
302