Table of Contents
Advertisement
MyKey
3. Place the remote control in the backup
slot with the buttons facing toward the
rear of the vehicle.
4. Switch the ignition on using the key you
want to create as MyKey.
5. Press Settings on the touchscreen.
6. Press Vehicle Settings.
7.
Press MyKey.
8. Press Create MyKey.
9. Press Yes.
10.
Switch the ignition off.
Note: You successfully created a MyKey.
We recommend that you label this key so
you can distinguish it from the admin keys.
Note: The programmed restrictions apply
when you switch the vehicle off, open and
close the driver door and restart your vehicle
with the programmed key or remote control.
PROGRAMMING A MYKEY
You can program any remote control to
become a restricted MyKey, but you must
leave one unmodified as an admin key.
1.
Switch the vehicle on using an admin
key.
2. Press Settings on the touchscreen.
3. Press Vehicle Settings.
4. Press MyKey.
5. Select and configure the settings.
2023 F-150 (TFD) Canada/United States of America, enUSA, Edition date: 202206, DOM
- Vehicles With: MyKey
101
(If Equipped)
CLEARING ALL MYKEYS
When you clear all MyKeys, you remove all
restrictions and return all MyKeys to their
original admin key status.
1.
Switch the vehicle on using an admin
key.
2. Press Settings on the touchscreen.
3. Press Vehicle Settings.
4. Press MyKey.
5. Press Clear All MyKeys.
6. Press Yes.
CHECKING MYKEY SYSTEM
STATUS
You can find information about the
distance traveled using a MyKey, and the
number of admin keys and MyKeys created
for your vehicle.
1.
Switch the vehicle on.
2. Press Settings on the touchscreen.
3. Press Vehicle Settings.
4. Press MyKey.
5. Press MyKey Information.
USING MYKEY WITH REMOTE
START SYSTEMS
MyKey is not compatible with unapproved,
aftermarket remote start systems. If you
choose to install a remote start system,
see an authorized dealer for an approved
remote start system.
(IF EQUIPPED)
Advertisement
Table of Contents
Troubleshooting
