Ford EVEREST 2015 Owner's Manual page 258

WARNINGS
WARNING: Do not get under a
vehicle that is supported by a jack.
E166722
WARNING
WARNING: The jack supplied with
this vehicle is only intended for
changing wheels. Do not use the
vehicle jack other than when you are
changing a wheel in an emergency.
The jack, wheel brace, and winch extension
tool are located in the stowage
compartment under the rear floor.
2
E206399
1. Lift the stowage bin lid.
2. Remove the locking strap and remove
the tools.
Everest (TEC), EB3B-19G219-YAA enAUS
Wheels and Tires
3. Rotate the retaining nut and remove
Spare Wheel
Note: The spare wheel is located
underneath the rear of the vehicle.
1.
2. Lower the third row seat-back to assist
E206440
3. In the rear storage compartment, lift
4. Insert the assembled wheel brace and
1
256
the jack.
Assemble the wheel brace and the
winch extension tool.
spare wheel winch operation. See
Technical Specifications (page 260).
3
rubber cover to expose wheel winch.
winch extension tool into the guide
hole and make sure it locates correctly.
Turn the wheel brace
counter-clockwise until the spare
wheel lowers from underneath the
vehicle and rests on the ground, and
there is slack in the cable.
2