Ford EVEREST 2015 Owner's Manual page 239

Replacing the High Beam Headlamp
Bulb
E205833
1. Remove the service cap.
2. Disconnect the electrical connector.
3. Remove the bulb from the headlamp
assembly by turning it
counterclockwise and pull it straight
1
out.
4. Install the new bulb in reverse order.
Replacing the Low Beam Headlamp
Bulb
E205825
1. Remove the service cap.
2. Disconnect the electrical connector.
3. Remove the bulb from the headlamp
assembly by turning it
counterclockwise and pull it straight
1
out.
Everest (TEC), EB3B-19G219-YAA enAUS
Maintenance
3 1
3 1
237
4. Release the retainer spring and remove
the bulb from the headlamp assembly
by pulling it straight out.
1
- Projector type headlamp assembly.
2
- Reflector type headlamp assembly.
Replacing the Front Parking Bulb
1. Turn the bulb assembly
counterclockwise and remove it from
the headlamp assembly.
2. Remove the bulb by gently pulling it
straight out of the socket.
3. Install the new bulb in reverse order.
Replacing the Direction Indicator Lamp
Bulb
1. Turn the bulb assembly
counterclockwise and remove it from
the headlamp assembly.
2. Remove the bulb from the bulb socket
by gently pushing it into the socket and
turning it counterclockwise.
3. Install the new bulb in reverse order.
Side Repeater
1
E133682
1. Slide the lens to the rear and remove
it.
2. Disconnect the electrical connector.
2
2