Everest (Tec), Eb3B-19G219-Yaa Enaus - Ford EVEREST 2015 Owner's Manual

Table of Contents

Advertisement

Rear Seats
(If Equipped)
WARNING
Persons who are unable to feel pain
to the skin because of advanced age,
chronic illness, diabetes, spinal cord
injury, medication, alcohol use, exhaustion,
or other physical conditions, must exercise
care when using the seat heater. The seat
heater may cause burns even at low
temperatures, especially if used for long
periods of time. Do not place anything on
the seat that insulates against heat, such
as a blanket or cushion, because this may
cause the seat heater to overheat. Do not
puncture the seat with pins, needles, or
other pointed objects because this may
damage the heating element which may
cause the seat heater to overheat. An
overheated seat may cause serious
personal injury.
Do not do the following:
Place heavy objects on the seat.
Operate the seat heater if water or any
other liquid is spilled on the seat. Allow
the seat to dry thoroughly.
Operate the heated seats unless the
engine is running. Doing so can cause
the battery to lose charge.
The rear seat heat controls are located on
the rear of the center console.
E146322

Everest (TEC), EB3B-19G219-YAA enAUS

Seats
Press the heated seat symbol to cycle
through the various heat settings and off.
More indicator lights indicate warmer
settings.
The heated seat module resets at every
ignition run cycle. While the ignition is on,
press the high or low heated seat switch
to enable heating mode. When activated,
they will turn off automatically when you
turn the engine off.
114

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents