Creating A Mykey - Vehicles With: Keyed Ignition; Creating A Mykey - Vehicles With: Push Button Start; Programming A Mykey - Ford TRANSIT 2022 Owner's Manual

Do Not Disturb
If you set do not disturb to be always on,
it cannot be switched off with a MyKey.
Traction and Stability Control
If you set traction control or stability
control to be always on, you cannot switch
it off with a MyKey.
CREATING A MYKEY -
VEHICLES WITH: KEYED
IGNITION
1. Switch the ignition on using an admin
key.
2. Using the information display controls
on the steering wheel, select Settings.
3. Select MyKey.
4. Select Create MyKey.
5. Press and hold the OK button until a
confirmation message appears in the
information display.
6. Switch the ignition off.
Note: We recommend that you label this
key.
2022 Transit (TTH) Canada/United States of America, NK3J 19A321 AA enUSA, Edition date: 202107, First-Printing
MyKey
CREATING A MYKEY -
VEHICLES WITH: PUSH
BUTTON START
E245386
1. Remove the rubber mat.
2. Place the admin key in the position
shown, with the buttons facing upward.
3. Switch the ignition on.
4. Using the information display controls
on the steering wheel, select Settings.
5. Select MyKey.
6. Select Create MyKey.
7. Press and hold the OK button until a
confirmation message appears in the
information display.
8. Switch the ignition off.
Note: We recommend that you label this
key.

PROGRAMMING A MYKEY

You can only program MyKeys to the same
settings.
1. Switch the ignition on using an admin
key.
2. Using the information display controls
on the steering wheel, select Settings.
3. Select MyKey.
84