Table of Contents
Advertisement
C
HAP T ER
This chapter explains some commands you can use to display information about the NXC's
current operational state.
4.1 Status Show Commands
The following table describes the commands available for NXC system status.
Table 8 Status Show Commands
COMMAND
show boot status
show comport status
show cpu status
show disk
show extension-slot
show fan-speed
show led status
show mac
show mem status
show ram-size
show serial-number
show socket listen
show socket open
show system uptime
show version
NXC CLI Reference Guide
DESCRIPTION
Displays details about the NXC's startup state.
Displays whether the console and auxiliary ports are on or off.
Displays the CPU utilization.
Displays the disk utilization.
Displays the status of the extension card slot and the USB ports and the names of
any connected devices.
Displays the current fan speed.
Displays the status of each LED on the NXC.
Displays the NXC's MAC address.
Displays what percentage of the NXC's memory is currently being used.
Displays the size of the NXC's on-board RAM.
Displays the serial number of this NXC.
Displays the NXC's listening ports.
Displays the ports that are open on the NXC.
Displays how long the NXC has been running since it last restarted or was turned
on.
Displays the NXC's model, firmware and build information.
4
Status
37
Advertisement
Table of Contents
