Table of Contents
Advertisement
C
HAP T ER
Use service objects to define TCP applications, UDP applications, and ICMP messages. You
can also create service groups to refer to multiple service objects in other features.
24.1 Services Overview
See the appendices in the web configurator's User Guide for a list of commonly-used services.
24.2 Services Commands Summary
The following table describes the values required for many service object and service group
commands. Other values are discussed with the corresponding commands.
Table 81 Input Values for Service Commands
LABEL
group_name
object_name
The following sections list the service object and service group commands.
24.2.1 Service Object Commands
The first table lists the commands for service objects.
Table 82 service-object Commands: Service Objects
COMMAND
show service-object [object_name]
no service-object object_name
service-object object_name {tcp | udp} {eq
<1..65535> | range <1..65535> <1..65535>}
NXC CLI Reference Guide
DESCRIPTION
The name of the service group. You may use 1-31 alphanumeric characters,
underscores(
_
), or dashes (-), but the first character cannot be a number. This
value is case-sensitive.
The name of the service. You may use 1-31 alphanumeric characters,
underscores(
_
), or dashes (-), but the first character cannot be a number. This
value is case-sensitive.
Services
DESCRIPTION
Displays information about the specified service or
about all the services.
Deletes the specified service.
Creates the specified TCP service or UDP service
using the specified parameters.
24
155
Advertisement
Table of Contents
