C
HAP T ER
This chapter provides information about the NXC's watchdog timers.
41.1 Hardware Watchdog Timer
The hardware watchdog has the system restart if the hardware fails.
The hardware-watchdog-timer commands are for support engineers. It
is recommended that you not modify the hardware watchdog timer settings.
Table 134 hardware-watchdog-timer Commands
COMMAND
[no] hardware-watchdog-timer <4..37>
hardware-watchdog-timer start
show hardware-watchdog-timer status
41.2 Software Watchdog Timer
The software watchdog has the system restart if the core firmware fails.
NXC CLI Reference Guide
Watchdog Timer
DESCRIPTION
Sets how long the system's hardware can be
unresponsive before resetting. The no command
turns the timer off.
Enables the hardware watchdog timer.
Displays the settings of the hardware watchdog
timer.
41
245