Table of Contents
Advertisement
C
HAP T ER
Use schedules to set up one-time and recurring schedules for policy routes, firewall rules,
application patrol, and content filtering.
25.1 Schedule Overview
The NXC supports two types of schedules: one-time and recurring. One-time schedules are
effective only once, while recurring schedules usually repeat. Both types of schedules are
based on the current date and time in the NXC.
Schedules are based on the current date and time in the NXC.
One-time schedules begin on a specific start date and time and end on a specific stop date and
time. One-time schedules are useful for long holidays and vacation periods.
Recurring schedules begin at a specific start time and end at a specific stop time on selected
days of the week (Sunday, Monday, Tuesday, Wednesday, Thursday, Friday, and Saturday).
Recurring schedules always begin and end in the same day. Recurring schedules are useful for
defining the workday and off-work hours.
25.2 Schedule Commands Summary
The following table describes the values required for many schedule commands. Other values
are discussed with the corresponding commands.
Table 84 Input Values for Schedule Commands
LABEL
object_name
time
NXC CLI Reference Guide
DESCRIPTION
The name of the schedule. You may use 1-31 alphanumeric characters,
underscores(
), or dashes (-), but the first character cannot be a number. This
_
value is case-sensitive.
24-hour time, hours and minutes; <0..23>:<0..59>.
25
Schedules
159
Advertisement
Table of Contents
