7.5 Learned Routing Information Commands
This table lists the commands to look at learned routing information.
Table 27 ip route Commands: Learned Routing Information
COMMAND
show ip route [kernel | connected | static] Displays learned routing and other routing information.
7.5.1 show ip route Command Example
The following example shows learned routing information on the NXC.
Router> show ip route
Flags: A - Activated route, S - Static route, C - directly Connected
O - OSPF derived, R - RIP derived, G - selected Gateway
! - reject, B - Black hole, L - Loop
IP Address/Netmask
Persist
===========================================================================
127.0.0.0/8
192.168.1.0/24
Router>
NXC CLI Reference Guide
DESCRIPTION
Gateway
IFace
0.0.0.0
lo
0.0.0.0
vlan0
Chapter 7 Route
Metric
Flags
0
ACG
-
0
ACG
-
71