Config:) Ip (Ge1 / Ge2 / Mgmt); Config:) Ip (Snmp) Read-Cmty; Config:) Ip (Snmp) Write-Cmty; Config:) Ip Snmp - Comtech EF Data CDM-740 Installation And Operation Manual

CDM-740 Advanced Satellite Modem
Front Panel Operation
Note the following:
Selection
Auto
1000F
100F
100H
10F
10H
(CONFIG:) IP
[HEADER] Negotiated Speed (read-only)
Down 1000F 100F 100H 10F 10H
Where [HEADER] is GE1, GE2, or MGMT( MANAGEMENT): This is a 'status only' display
showing the negotiated line speed and duplex setting for this interface. Exit this read-only screen
by pressing ENTER or CLEAR.
Note the following:
Selection
Down
1000F
100F
100H
10F
10H
5.4.5.2 (CONFIG:) IP
SNMP Read Community
[public
To edit the SNMP Read Community string, use the ◄ ► arrow keys to select the character to edit,
then use the
▲ ▼
Note: Only the first 15 characters on the bottom line are available.
All printable ASCII characters are available with the exception of the backslash (ASCII code 92)
and ~ (ASCII code 126).
Once the string has been composed, press ENTER. All trailing spaces are removed from the
Read Community string upon entry.
Description
The port will auto-negotiate the configuration of the port (recommended
when the configuration of the port is unknown)
1000 Mb / Full Duplex
100 Mb / Full Duplex
100 Mb / Half Duplex
10 Mb / Full Duplex
10 Mb / Half Duplex
(GE1 / GE2 / MGMT)
Description
Ethernet is disconnected
1000 MB / Full Duplex
100 MB / Full Duplex
100 MB / Half Duplex
10 MB / Full Duplex
10 MB / Half Duplex
(SNMP) Read-Cmty
]
arrow keys to select the desired character.
NegoSpeed
(Max 15 chars)
5–17
Revision 0
MN-CDM740
◄►
( E)
◄►
( E)