Cautions And Warnings; Electrical Safety And Compliance; Fuses - Comtech EF Data CDM-740 Installation And Operation Manual

CDM-740 Advanced Satellite Modem
Preface
The user should carefully observe the following information:
IMPORTANT

Cautions and Warnings

IMPORTANT or NOTE indicates a statement associated with the task being
performed or information critical for proper equipment function.
IMPORTANT
CAUTION indicates a hazardous situation that, if not avoided, may result in
minor or moderate injury. CAUTION may also be used to indicate other unsafe
practices or risks of property damage.
CAUTION
WARNING indicates a potentially hazardous situation that, if not avoided, could
result in death or serious injury.
WARNING

Electrical Safety and Compliance

The CDM-740 has been shown to comply with the EN 60950 Safety of Information
Technology Equipment, Including Electrical Business Machines safety standard.
The equipment is rated for operation over the range 100-240 volts AC or, appropriately equipped,
36-60 volts DC. It has a maximum power consumption of 300 watts.

Fuses

FOR CONTINUED OPERATOR SAFETY, ALWAYS REPLACE THE FUSES WITH
THE CORRECT TYPE AND RATING.
CAUTION
The CDM-740 is fitted with two fuses – one each for line and neutral connections. These fuses
are contained within the body of the IEC power inlet connectors, behind a hinged plastic flap.
Observe the following:
•
For 230/115 volt AC operation, use T5A 20mm slow-blow fuses.
•
For 48 volt DC operation, use a T8A 20mm blow-blow fuses.
Examples of
Multi-Hazard Formats
xii
Revision 0
MN-CDM740