Comtech EF Data CDM-740 Installation And Operation Manual page 128

CDM-740 Advanced Satellite Modem
Remote Control
Command
Parameter Number of
(Instruction
Type Arguments
& Qualifier)
GE1 Address IG1= 18 bytes
numerical
GE2 Address IG2= 18 bytes
numerical
Current IMG= 1 byte, value of
Software 1 or 2
Image
Management IPA= 18 bytes
IP Address numerical
Description of Arguments
Command or Query.
Sets the IP Address and network prefix for the 10/100/1000 BaseT GE1
Ethernet port, in the form aaa.bbb.ccc.ddd.yy, where:
(Permitted ranges – cannot all be zero)
aaa = 0-223
bbb = 0-255
ccc = 0-255
ddd = 0-255
yy = network prefix (range: 8 to 31)
Other restrictions:
If aaa>191, prefix may not be less than 24.
If aaa>127, prefix may not be less than 16.
Example: IG1=010.006.030.001.24
Command or Query.
Sets the IP Address and network prefix for the 10/100/1000 BaseT GE2
Ethernet port, in the form aaa.bbb.ccc.ddd.yy, where:
(Permitted ranges – cannot all be zero)
aaa = 0-223
bbb = 0-255
ccc = 0-255
ddd = 0-255
yy = network prefix (range: 8 to 31)
Other restrictions:
If aaa>191, prefix may not be less than 24.
If aaa>127, prefix may not be less than 16.
Example: IG2=010.006.030.001.24
Query Only.
Active software image, where:
1=Bulk Image #1 currently active
2=Bulk Image #2 currently active
Command or Query.
Sets the IP Address and network prefix for the 10/100 Base T Ethernet
management port, in the form aaa.bbb.ccc.ddd.yy, where:
(Permitted ranges – cannot all be zero)
aaa = 0-223
bbb = 0-255
ccc = 0-255
ddd = 0-255
yy = network prefix (range: 8 to 31)
Example: IPA=010.006.030.001.24
A–14
MN-CDM740
Query
Response to
(Instruction Response to Query
Command
& Qualifier)
IG1= IG1? IG1=xxx.xxx.xxx.xxx.yy
IG1? (see Description of
IG1* Arguments)
IG1#
IG1= IG2? IG2=xxx.xxx.xxx.xxx.yy
IG1? (see Description of
IG1* Arguments)
IG1#
IMG= IMG? IMG=x
IMG? (see Description of
IMG* Arguments)
IMG#
IPA= IPA? IPA=xxx.xxx.xxx.xxx.yy
IPA? (see Description of
IPA* Arguments)
IPA#
Revision 0