Table of Contents
Advertisement
● Preferences
The monitor's settings can be configured to suit the usage environment or personal preference.
Function
Adjustable range
Auto Input Detection
On
Off
Menu Rotation
0°
90°
Description
When this function is set to "On", the monitor automatically rec-
ognizes the connector through which signals are input, so that
the screen can be displayed. When an external device enters the
power saving mode, the monitor automatically displays another
signal.
When set to "Off", the monitor displays the signal from the select-
ed connector regardless of whether a signal is input or not. In this
case, select the input signal to display using the operation switch
(
) on the front of the monitor.
This function allows you to change the orientation of the Setting
menu to align with the installation orientation.
- 34 -
Chapter 3 Advanced Adjustments/Settings
Note
• When the main power is turned on/off, the
signal is detected automatically regardless of
the setting for this function.
• When the "Picture Setup" setting in the
"Administrator Settings" menu is set to "Dual",
we recommend that this function be set to "Off".
• Be sure that the cables are correctly
connected.
• When using the monitor screen in a portrait
position, the graphics board supporting
portrait display is required. When placing the
monitor in a portrait position, settings of your
graphics board need to be changed. Refer to
the User's Manual of the graphics board for
details. Also, visit the EIZO website
(http://www.eizoglobal.com).
• When using this product in a portrait position,
you need to remove the stand and attach an
arm. You cannot rotate the monitor into the
portrait position with the stand attached as is.
Advertisement
Table of Contents
