Eizo ColorEdge CG318-4K User Manual page 39

Function Adjustable Range
Picture Setup DisplayPort Single
Dual
HDMI Single
Dual
Description
When dual signals are input into the monitor from a single PC and
screens are displayed side by side, change this setting to "Dual".
For example, this is set when using a graphics board that does
not support 4K2K (4096 × 2160) signal output, by displaying two
2048 × 2160 signals side by side on the screen to create a 4K2K
screen.
4096 × 2160
2048 × 2160
- 39 -
• When using "Dual" display, the signal input
from DisplayPort 1 or HDMI1 is displayed
on the left side of the screen, and the
signal input from DisplayPort 2 or HDMI 2
is displayed on the right side of the screen.
2048 × 2160 • The supported resolutions when using
"Dual" are as follows.
PC
• When using "Dual" display, the connector
settings of the screen on the left, such as
the color settings, will be applied.
Chapter 4 Administrator Settings
Note
When using PC signal input
640 × 480 / 720 × 400 / 800 × 600 /
1024 × 768 / 1280 × 960 /
1280 × 1024 / 1600 × 1200 /
1920 × 1080 / 1920 × 1200 *1 /
1920 × 2160 / 2048 × 2160
*1 DisplayPort Ver.1.2 input only
When using Video signal input
720 × 480 (480p/i) / 720 × 576 (576p/i) /
1280 × 720 (720p) / 1920 × 1080
(1080p/i)