Eizo ColorEdge CG318-4K User Manual page 25

Function
Target Brightness
White White(x) / White(y) 0.2400 to 0.4500
Point
Temperature
Color Gamut
Gamut Red(x) / Red(y) /
Settings Green(x) /
Green(y) / Blue(x) /
Blue(y)
Clipping
Gamma
Adjustable range
2
30 cd/m to Set the brightness that will be used as a calibration target for
2
200 cd/m SelfCalibration.
Set the White Point that will be used as a calibration target for
SelfCalibration.
4000 K to 10000 K
Set the White Point using the color coordinates (White(x) /
Adobe ® RGB
White(y)) or color temperature.
sRGB
EBU
When specifying color coordinates, set the values for "White(x)"
REC709
and "White(y)", respectively.
REC1886
When specifying the color temperature, set the color tempera-
REC2020
ture in units of 100 K, or a select the color temperature that
SMPTE-C
complies with each standard.
DCI
Native Set the color gamut that will be used as a calibration target for
Adobe ® RGB SelfCalibration.
sRGB
EBU In "Color Gamut", the color gamut defined by each standard
REC709 can be selected.
REC1886 To set a color gamut other than those specified by each
REC2020 standard, specify the color coordinates of each RGB color, and
SMPTE-C the display method ("Clipping") of colors outside the monitor's
DCI color gamut at "Gamut Settings".
0.0000 to 1.0000
On
Off
1.6 to 2.7 Set the gamma that will be used as a calibration target for
Adobe ® RGB SelfCalibration.
sRGB
EBU You can set the gamma, or select the gamma curve defined by
REC709 each standard.
REC1886
REC2020
SMPTE-C
DCI
- 25 -
Chapter 3 Advanced Adjustments/Settings
Description Note
-
• When color coordinates are
specified, the color temperature
is changed to "User".
• When you select "Native" in
"Color Gamut", the preset color
gamut of the monitor is displayed.
• When color coordinates are
specified in the color gamut
settings, the color gamut is
changed to "User".
• The gamma becomes
"Fixed" when adjusting with
ColorNavigator.