Eizo ColorEdge CG318-4K User Manual page 24

When the color mode is Calibration Mode (CAL mode: CAL1 / CAL2)
You can set the calibration targets, and check the calibration results, for SelfCalibration.
(SelfCalibration is a function that automatically operates a calibration sensor built in to the monitor to periodically calibrate the monitor. For more information,
see "SelfCalibration" (page 27).)
Function
Color Mode
SelfCalibration
Adjustable range
Custom Select the desired mode according to the monitor application.
®
Adobe RGB
sRGB
EBU
REC709
SMPTE-C
DCI
REC2020
CAL1
CAL2
On Switch between enabling/disabling the SelfCalibration function.
Off
After setting "On", set a SelfCalibration target in the next
"Target".
- 24 -
Chapter 3 Advanced Adjustments/Settings
Description Note
• For more information on the
adjustment status of each mode,
see "2-3. Switching the display
mode (color mode)" (page 17).
• Before setting the calibration
targets for SelfCalibration, select
the color mode (CAL1 / CAL2)
which applies the target.
• For information on Custom /
Adobe ® RGB / sRGB / EBU /
REC709 / SMPTE-C / DCI /
REC2020, see page 21.
-