Table of Contents
Advertisement
Input Signal
(The setting range of each
function differs depending
on the input signal.)
Function
√: Settable -: Not settable
DisplayPort
Picture Expansion
√
-
Input Color Format
√
-
-
Adjustable
range
HDMI
PC
Video
signal
signal
√
-
Full Screen
Aspect Ratio
Dot by Dot
-
√
Auto
Full Screen
Aspect Ratio
Dot by Dot
-
-
Auto
YUV
RGB
√
-
YUV 4:2:2
YUV 4:4:4
RGB
-
√
Auto
YUV
RGB
Description
The screen size of the monitor display can be changed.
• "Auto"
The monitor automatically changes the screen size
according to the resolution information and aspect ratio
information sent from the input signal.
• "Full Screen"
Displays an image in full screen. Images are distorted in
some cases because the vertical rate is not equal to the
horizontal rate.
When using video signal (480p/i, 576p/i) input, the image
will be displayed in full screen while maintaining the 16:9
aspect ratio.
• "Aspect Ratio"
Displays an image in full screen. However, since aspect
ratios are maintained, part of an image may not be visible
in horizontal or vertical direction.
When using video signal (480p/i, 576p/i) input, the image
will be displayed in full screen while maintaining the 4:3
aspect ratio.
• "Dot by Dot"
Displays the image at the set resolution or at the size
specified by the input signal.
The color format of the input signal can be specified.
Try changing this setting if colors are not displayed correctly.
- 31 -
Chapter 3 Advanced Adjustments/Settings
Note
• Example settings
- Full Screen
- Aspect Ratio
- Dot by Dot (input signal)
• This setting is required when
a DVI device is connected
to the monitor via the HDMI
connector port using a DVI-
HDMI conversion connector.
Advertisement
Table of Contents
