Table of Contents
Advertisement
●
Preferences
Auto Input Detection
This product automatically detects the connector through which a signal is input, and displays the
signal on the screen.
Setting Range
On, Off
Setting
On
Automatically detects the connector through which a signal is input, and displays the signal
on the screen.
If the PC that is outputting the signal displayed on the screen enters the power saving mode
or is turned off when multiple PCs are connected, any other available signal is displayed
automatically.
Off
The monitor displays the signal from the selected connector regardless of whether a signal
is input or not. Select the input signal to display using
Switching the Input Signal" (page
Note
• When the power cable is reconnected, the signal of the connector to which the signal is impressed is
displayed regardless of the settings.
• If "On" is selected, the monitor enters the power saving mode after all the PCs have entered the power saving
mode or have been switched off.
Power Save
This function allows you to set the monitor into the power saving mode according to the PC status.
When the monitor has shifted to the power saving mode, the images on the screen are not displayed.
Setting Range
On, Off
Setting
On
The monitor shifts to the power saving mode synchronously with the state of the PC.
Off
The monitor does not shift to the power saving mode regardless of the status of the PC or
signal input.
Note
• Disconnecting the power outlet cuts the power consumption completely, when not using the monitor.
• The monitor changes to power saving mode about 15 seconds after detecting no input signal.
Function
. For more information, see
5).
Function
Chapter 2 Advanced Adjustment / Setting
"1-2.
13
Advertisement
Table of Contents
