Table of Contents
Advertisement
3-2. Setting Menu Functions
● Color
The setting details differ depending on the color mode selected.
When the color mode is Standard Mode (Custom / Adobe
Each color mode setting status can be adjusted according to personal preference.
Attention
• It takes about 3 minutes (under our measurement conditions) for the performance of electrical parts to stabilize. Please wait 3 minutes or more after the monitor power has
been turned on, and then adjust the monitor.
• The same image may be seen in different colors on multiple monitors due to their monitor-specific characteristics. Make fine color adjustment visually when matching colors
on multiple monitors.
Note
• Use the values shown in "cd/m
Function
Color Mode
Brightness
2
", "K" and "%" as a guide only.
Adjustable range
Custom
Select the desired mode according to the monitor application.
®
Adobe
RGB
sRGB
EBU
REC709
SMPTE-C
DCI
REC2020
CAL1
CAL2
2
40 cd/m
to
The screen brightness is adjusted by changing the brightness of
2
350 cd/m
the backlight (light source from the LCD back panel).
RGB / sRGB / EBU / REC709 / SMPTE-C / DCI / REC2020)
®
Description
- 21 -
Chapter 3 Advanced Adjustments/Settings
Note
• For more information on the adjustment status
of each mode, see
"2-3. Switching the display
mode (color mode)" (page
17).
• Regarding "CAL1 / CAL2", see
page
• If the entered value cannot be set, the value
will appear in magenta. In such a case,
change the value.
24.
Advertisement
Table of Contents
