Eizo ColorEdge CG318-4K User Manual page 28

Function
Execute
Settings Schedule Start time
Adjustable range
- SelfCalibration can be executed manually regardless of the
schedule.
Power Save Select the timing to execute SelfCalibration upon reaching the
Immediately time set in the schedule.
Off • "Power Save"
To be executed under any of the following conditions.
- When the monitor is in "Power Save" mode or power is
off at the set time.
- The monitor shifts to the power saving mode or the
power is turned off when the time period set in the
schedule has elapsed.
• "Immediately"
SelfCalibration is executed immediately at the set time.
• "Off"
SelfCalibration is not executed.
- 28 -
Chapter 3 Advanced Adjustments/Settings
Description Note
• After selecting "Execute", warm-
ing up may be executed before the
built-in calibration sensor comes
out.
• Upon reaching the set time, the
power indicator will blink in white
(quickly twice).