Chapter 1 Introduction; Features - Eizo ColorEdge CG318-4K User Manual

Color management lcd monitor
Hide thumbs Also See for ColorEdge CG318-4K:
Table of Contents

Advertisement

Chapter 1 Introduction

Thank you very much for choosing an EIZO color LCD monitor.

1-1. Features

• 31.1" widescreen
• Wide color gamut display (Adobe
• Achieves contrast ratio of 1500:1 (typical)
A high contrast ratio allows display of crisper black with reduced whiteness.
*1 When "DUE Priority" is set to "Brightness"
• Supports a resolution of 4096 × 2160.
Can display 4K (4096 × 2160) resolution, defined by the DCI standard, as is.
• Pixel density: 149 ppi
Can display text and images in high definition.
• IPS panel with 89˚ horizontal and vertical wide viewing angles
• The time from switching on the monitor until the display is stable has been shortened to approximately 3 minutes
*2 According to EIZO measurement conditions. However, if performing SelfCalibration
order to obtain correct measurement results.
• Frame synchronization mode supported (23.75 – 30.25 Hz, 47.5 – 60.5 Hz)
• Support for four digital signal inputs (DisplayPort (HDCP) × 2, HDMI (HDCP, Deep Color) × 2)
- DisplayPort (supports 8 bit and 10 bit)
- HDMI (supports 8 bit, 10 bit, and 12 bit)
*3 Audio signals not supported.
*4 The maximum screen display is 10 bits.
• Color mode function
Reproduces a color temperature, gamma, and gamut compliant with the following standards.
- Broadcasting standards "EBU/REC709/REC1886/REC2020/SMPTE-C"
- Digital cinema standard "DCI"
®
- Adobe
RGB / sRGB
See
"Chapter 3 Advanced Adjustments/Settings" (page 20)
• This product is equipped with a built-in calibration sensor, and supports SelfCalibration in which the monitor executes calibration independently.
See
"SelfCalibration" (page 27)
®
RGB coverage: 99%, DCI-P3 coverage: 98%)
*1
*3,*4
*3, *4
(page
27), it is necessary to wait at least 30 minutes after turning on the power, in
- 7 -
Chapter 1 Introduction
*2

Advertisement

Table of Contents
loading

Table of Contents