Suzuki DF 40 Service Manual page 251

9-17 LOWER UNIT
PINION NUT
Apply Thread Lock 1342 to the threads of the pinion nut before
threading it onto the driveshaft.
Tighten nut to the specified torque.
Pinion nut : 50 N . m (5.0 kg-m, 36.2 lb.-ft.)
99000-32050 : Thread Lock 1342
09921-29510 : Drive shaft holder
CHECKING DRIVESHAFT THRUST PLAY
Before installing reverse gear, driveshaft thrust play should
checked.
(See the "GEARS-SHIMMING AND ADJUSTMENT / CHECK-
ING DRIVESHAFT THRUST PLAY" section on page 9-26)
09951-09510 : Gear adjusting gauge
PROPELLER SHAFT
Slide the clutch dog shifter
NOTE:
For correct installation the side of the clutch dog shifter which
must face towards forward gear is marked with the letter "F".
Insert the return spring
propeller shaft.
Align the holes in the shifter dog and push pin. Depress the
push rod and slide the dog pin
pin.
Install the dog pin retaining spring
into the groove on the dog shifter.
onto the propeller shaft
, push pin and push rod
through both dog and push
, ensuring that it fits snuggly
.
" "
F
into