Suzuki DF 40 Service Manual page 219

8-9 POWER TRIM AND TILT
Installing tilt rod / piston
Free piston
Pour 100 ml of PTT fluid into cylinder.
Top OFF
Insert the free piston into cylinder and push it down to the bot-
tom of the cylinder.
Cylinder
Pour PTT fluid into the cylinder until it is topped off.
Insert the tilt rod / piston into cylinder and thread the tilt cylin-
der head by hand until fully seated.
Tighten the cylinder head to specified torque using special tool.
Tilt cylinder head : 44 N . m (4.5 kg-m, 32.5 lb.-ft.)
09944-08711 : PTT cylinder cap tool
PTT MOTOR
See the PTT Motor Installation section on page 8-13.
AIR BLEEDING
See the AIR BLEEDING section on page 8-2.