6-3 POWER UNIT
POWER UNIT
REMOVAL
Before removing power unit :
• Drain engine oil.
• Remove intake manifold assembly. (See page 6-1)
Remove two bolts and low pressure fuel pump
Disconnect ignition coil connectors.
Remove the bolt securing the ignition coil
Remove all ignition coils
Disconnect CMP sensor connector
Remove the twelve (12) cylinder head cover bolts, and then
remove cylinder head cover
Remove starter motor. (See page 4-11)
Remove flywheel. (See page 3-48)
09930-48720 : Flywheel holder
09930-39411 : Flywheel remover
09930-39420 : Flywheel remover bolt
.
.
and spark plugs.
.
.