Suzuki DF 40 Service Manual page 236

Loosen the four(4) nuts
, impeller , and pump under plate
Keep the impeller key
ket.
Remove the two (2) bolts
ing housing to the gearcase.
Using special tools, draw out the propeller shaft bearing hous-
ing.
Remove the propeller shaft and bearing housing assembly.
09930-30102 :
09930-30161 :
Hold the pinion nut securely, then fit special tool to the driveshaft
and loosen the pinion nut.
09921-29510 : Driveshaft holder
, then remove the water pump case
.
for reuse and discard the plate gas-
securing the propeller shaft bear-
Sliding hammer
Propeller shaft remover
LOWER UNIT 9-2