Fujitsu Primergy BX900 System Message Manual page 82
Blade server systems
ethernet connection blade module sb6 / sb11a / sb11 switch and ibp version
Hide thumbs
Also See for Primergy BX900:
- User manual (811 pages) ,
- Hardware reference manual (69 pages) ,
- Configuration manual (67 pages)
Table of Contents
Advertisement
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
6
Failed to set igmp snooping mode (Enable/Disbale) for interface
number
Setting the specific interface's admin mode fail.
The interface number is failed to set.
6
Failed to set igmp mrouter mode (Enable/Disable) for interface
number
Setting the specific interface's igmp mrouter mode fail.
The IGMP Snooping module is failed to init.
6
Failed to set igmp snooping mode (Enable/Disbale) for vlan
Setting the specific vlan's igmp snpooping mode fail.
The IGMP snooping is not set the vlan group successfully.
6
Failed to set igmp mrouter mode(Enable/Disbale) for interface
number on Vlan
Setting the specific vlan and interface number mrouter mode fail.
The specific vlan interface number is need to checked again.
6
snoopSave: Error on call to sysapiCfgFileWrite file
snoopCfgData.cfg
Can not save configuration value into config-file.
The igmp snooping config file is corrupt instead of the factory
Factory.
6
snoopInit: msgQueue creation error.
Creating Message Queue fail.
The IGMP Snooping module is failed to init.
6
snoopCnfgrInitPhase1Process: Error allocating small buffers
Memory Allocation fail.
The IGMP Snooping module is failed to init.
2011 Fujitsu Technology Solutions
©
Advertisement
Table of Contents
