Fujitsu Primergy BX900 System Message Manual page 423
Blade server systems
ethernet connection blade module sb6 / sb11a / sb11 switch and ibp version
Hide thumbs
Also See for Primergy BX900:
- User manual (811 pages) ,
- Hardware reference manual (69 pages) ,
- Configuration manual (67 pages)
Table of Contents
Advertisement
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Could not set the simple policing committed rate value.
User try to configure the simple policing committed rate, but the
Class name is not associated with the policy.
Refresh the WEB page, and select the Class name again.
If Conform Action Selector or Violate Action field selected Mark
Cos, the other field should be Drop.
User try to add a Police Simple Attribute to a DiffServ Policy, and
select the Conform or Violate action with 'Mark CoS' , but the
other action does not set to 'Drop'.
Set Conform or Violate action with 'Mark CoS' for a DiffServ
Policy Attribute, the other action must set to 'Drop'.
Could not set the policy attribute type.
User try to configure the policy attribute type, but the Class name
is not associated with the policy.
Refresh the WEB page, and select the Class name again.
Could not set the mirror interface.
User try to configure the mirror interface of the policy attribute,
but the Class name is not associated with the policy.
Refresh the WEB page, and select the Class name again.
Could not set the redirect interface.
User try to configure the redirect interface of the policy attribute,
but the Class name is not associated with the policy.
Refresh the WEB page, and select the Class name again.
Color Aware mode requires the existence of one or more color
classes that are valid for use with this policy instance. Press
'Help' for more details.
User try to configure the Color Aware attribute of a DiffServ
Policy Attribute, but the system can not apply the setting.
1. Create 2 DiffServ Classes(C1 and C2), and one Class(C2)
must contains a single, non-excluded match criterion for one of
the following fields 'CoS' , 'IP DSCP' , 'IP Precedence'.
2. Create a DiffServ Policy(P1) and add 2 DiffServ Classes to the
Member Class List.
3. In the 'Class Definition' tab, add a 'Police Simple' Attribute
with C1 class for P1 policy. Click the 'Configure Selected
Attribute' button.
4. Change the Color Mode to 'Color Aware', and confirm the
setting, the Color Aware Mode should be applied successfully.
2011 Fujitsu Technology Solutions
©
Advertisement
Table of Contents
