Fujitsu Primergy BX900 System Message Manual page 269

Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Incorrect input! Use 'ip access-group {<1-199>|<name>} in
[<sequence>]'.
User input incomplete command.
Use 'ip access-group {<1-199>|<name>} in [<sequence>]'.
Incorrect input! Use 'no ip access-group {<1-199>|<name>} in '.
User input incomplete command.
Use 'no ip access-group {<1-199>|<name>} in '.
ACL ID does not exist.
User attempt to delete a non-exist ACL.
Make sure the ACL is exist.
Error: ACL and Diffserv can not be used on the same interface in
the same direction.
User attempt to enable ACL & Diffserv on the same interface.
User can only enable one function ACL or Diffserv on a interface.
ACL sequence number is already at limit for this interface and
direction.
User attempt to add ACL to the interface has arrived maximum
ACL sequence number < 4294967295>.
Use command "show access-lists" to verify the ACL sequence
number is at limit.
ACL does not exist or the interface has not been configured with
an ACL.
User attempt to remove a ACL does not assign to this interface.
Make sure the ACL has been assigned to the interface.
The maximum number of ACLs reached for this interface.
User attempt to add ACL to the interface has arrived maximum
number of ACLs.
Maximum 9 ACLs can be created for a interface.
Incorrect input! Use 'show access-lists interface <interface> in'.
User input incomplete command .
Use 'show access-lists interface <interface> in'.
2011 Fujitsu Technology Solutions
©