Fujitsu Primergy BX900 System Message Manual page 421

This section contains Policy-map module messages.
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error: Invaid Policy name.
User try to create a policy without the policy name.
To create DiffServ Policy with a policy name.
Error: Name must be alpha-numeric.
User try to configure DiffServ Policy name with
non-alphanumeric characters.
Use alphanumeric characters for DiffServ Policy name.
Error: This DiffServ Policy already exists.
User try to configure a DiffServ Policy, but the policy name is
already used in the system.
Use other unused name for DiffServ Policy.
Error: Failed to delete class from policy.
User try to remove a Class form Member Class List of the Policy,
but the Class does not the last class of the class list.
User should remove the Class from the last class of the Member
Class List.
Invalid value field. No action taken.
User try to configure DiffServ Policy action with non-numeric
characters or is out of range.
Use numeric character for the DiffServ Policy action and set the
value with correct range value.
Could not find a free index in policy attribute table.
User try to set the DiffServ policy attribute, but the Class name is
not associated with the policy.
Refresh the WEB page, and select the Class name again.
This Diffserv Class is not a member of this policy.
User try to set the DiffServ policy attribute, but the Class name is
not associated with the policy.
Refresh the WEB page, and select the Class name again.
2011 Fujitsu Technology Solutions
©