Fujitsu Primergy BX900 System Message Manual page 58
Blade server systems
ethernet connection blade module sb6 / sb11a / sb11 switch and ibp version
Hide thumbs
Also See for Primergy BX900:
- User manual (811 pages) ,
- Hardware reference manual (69 pages) ,
- Configuration manual (67 pages)
Table of Contents
Advertisement
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
6
dot1xRadiusAccountingStop: error calling
radiusAccountingStop, ifIndex=<Interface Index>
Send accounting stop request failed.
The dot1x & Radius is not syschonous
6
dot1xApmMachine: could not set state to unauthorized, intf
<Interface Number>
If port is not operable, set it to unauthorized.
The port is not operable.
6
dot1xApmDisconnectedAction: failed sending terminate cause,
intf <Interface Number>
Failed sending terminate cause when the APM state
disconnected.
The system is disconnected by the Radius server.
6
dot1xApmDisconnectedAction: could not set state to
unauthorized, intf <Interface Number>
Could not set state to unauthorized in the APM state
disconnected.
The system is disconnected by the Radius server.
6
dot1xApmForceAuthAction: could not set state to unauthorized,
intf <Interface Number>
Could not set state to unauthorized in the APM state
authenticated.
The system is disconnected by the Radius server.
6
dot1xApmHeldAction suppRestarting: failed sending terminate
cause, intf <Interface Number>
Failed sending terminate cause supplicant restart.
The system is terminate to send.
2011 Fujitsu Technology Solutions
©
Advertisement
Table of Contents
