Fujitsu Primergy BX900 System Message Manual page 386
Blade server systems
ethernet connection blade module sb6 / sb11a / sb11 switch and ibp version
Hide thumbs
Also See for Primergy BX900:
- User manual (811 pages) ,
- Hardware reference manual (69 pages) ,
- Configuration manual (67 pages)
Table of Contents
Advertisement
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
This section contains the Mirroring module messages.
Error Message
Explanation
Recommended Action
Error: Failed to set Admin Mode. This function is not allowed on
port-channel members <interface identifier>.
User try to set Admin Mode on a prot-channel member, and it is
failed.
To set the Admin Mode from the port-channel interface.
Error: Failed to set Port Description.
User try to change the Port Description of the interface, but the
interface doesn't exist in the system.
Refresh the WEB page, and select the interface again.
Error: Maximum Frame Size format is invalid.
The value of Port Maximum Frame Size is out of range.
Set Port Maximum Frame Size with numeric value from 1518 to
9216.
Error: Value (<value>) is out of range for Maximum Frame Size.
The valid range is 1518 to 9216.
The value of Port Maximum Frame Size is out of range.
Set Port Maximum Frame Size with numeric value from 1518 to
9216.
Error: You must select a destination port.
The destination port is not selected.
The destination port must be selected before enable port-mirror
function.
2011 Fujitsu Technology Solutions
©
Advertisement
Table of Contents
