Fujitsu Primergy BX900 System Message Manual page 192
Blade server systems
ethernet connection blade module sb6 / sb11a / sb11 switch and ibp version
Hide thumbs
Also See for Primergy BX900:
- User manual (811 pages) ,
- Hardware reference manual (69 pages) ,
- Configuration manual (67 pages)
Table of Contents
Advertisement
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Failed to set the native vlan with the Dynamic VLAN type.
User attempt to set native VLAN of the interface with Dynamic
VLAN ID.
Dynamic VLAN ID can not be set for native VLAN.
Incorrect input! Use 'switchport tagging <1-3965>'.
User input incomplete command.
Use 'switchport tagging <1-3965>'.
Incorrect input! Use 'no switchport tagging <1-3965>'.
User input incomplete command.
Use 'no switchport tagging <1-3965>'.
Incorrect input! Use 'switchport tagging all <1-3965>'.
User input incomplete command.
Use 'no switchport tagging <1-3965>'.
Incorrect input! Use 'no switchport tagging all <1-3965>'.
User input incomplete command.
Use 'no switchport tagging all <1-3965>'.
Incorrect input! Use 'vlan makestatic <2-4094>'.
User input incomplete command.
Use 'vlan makestatic <2-4094>'.
Incorrect input! Use 'vlan ?' to list commands.
User input incorrect vlan comment.
Use 'vlan ?' to list commands.
Can't Create/Delete a VLAN, when the VTP client is enabled.
User can't create or delete a VLAN when the switch is configured
with VTP client.
Change to VTP server mode.
VLAN already exists.
User create a VLAN, and it was existed.
Use create a new VLAN.
2011 Fujitsu Technology Solutions
©
Advertisement
Table of Contents
