Fujitsu Primergy BX900 System Message Manual page 134
Blade server systems
ethernet connection blade module sb6 / sb11a / sb11 switch and ibp version
Hide thumbs
Also See for Primergy BX900:
- User manual (811 pages) ,
- Hardware reference manual (69 pages) ,
- Configuration manual (67 pages)
Table of Contents
Advertisement
This section contains the Configuration In-band management messages.
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Incorrect input! Use 'ip default-gateway <gateway>'.
Incomplete command for this function.
Use 'ip default-gateway <gateway>'.
IP address and netmask must be set first.
User attempt to set default-gateway before configuring
management IP address.
Set the management IP address & netmask first.
IP Address/Netmask entered conflicts with the configured IP
Address/Netmask of the oob mgmt interface.
User attempt to set In-band management IP address that is the
same subnet with OOB management interface.
Use different subnet to configure In-band & Out-band
management IP address.
Incorrect input! <gateway> must be a valid IP Address.
User input a invalid IP address for gateway.
Use the valid IP address for gateway.
Incorrect input! Use 'ip address <ipaddr> <netmask>'.
Incomplete command for this function.
Use 'ip address <ipaddr> <netmask>'.
Incorrect input! Use 'ip address protocol {none | bootp | dhcp}'.
Incomplete command for this function.
Use 'ip address protocol {none | bootp | dhcp}'.
Incorrect input! Use 'ipv6 address protocol {dhcp6 | none}'.
Incomplete command for this function.
Use 'ipv6 address protocol {dhcp6 | none}'.
2011 Fujitsu Technology Solutions
©
Advertisement
Table of Contents
