Fujitsu Primergy BX900 System Message Manual page 371

Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error: Value (<value>) is out of range for Port Path Cost. The
valid range is 0 to 200000000.
The value of Spanning-Tree CST Port Path Cost is out of range.
Set Spanning-Tree CST Port Path Cost with numeric character 0
to 200000000.
Error: Failed to set Port Priority.
The interface is not valid to set Port Priority.
Refresh the WEB page, and select the interface again.
Error: Failed to set Admin Edge Port.
The interface is not valid to set Admin Edge Port.
Refresh the WEB page, and select the interface again.
Failed to Set External Path Cost.
The interface is not valid to set External Path Cost. The interface
might be deleted from other UI.
Refresh the WEB page, and select the interface again.
Error: Failed to set BPDU Migration Check. Could not force
BPDU migration check.
User try to force the port to send out 802.1w or 802.1d BPDUs,
but the Spanning-tree protocol still using 802.1d(STP).
User should change the Spanning-tree mode to 802.1w(RSTP)
or 802.1s(MSTP), and then click 'Force' button of the interface in
CST Port tab.
Error: Port Priority format is invalid.
The value of Spanning-Tree MST Port Priority is not numeric
characters.
Set Spanning-Tree MST Port Priority with numeric character 0 to
240.
Error: Value (<value>) is out of range for Port Priority. The valid
range is 0 to 240.
The value of Spanning-Tree MST Port Priority is out of range.
Set Spanning-Tree MST Port Priority with numeric character 0 to
240.
2011 Fujitsu Technology Solutions
©