Fujitsu Primergy BX900 System Message Manual page 356

Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error: VLAN ID format is invalid.
The value of IGMP Snooping Querier VLAN ID is not numeric
character.
Set IGMP Snooping Querier VLAN ID with numeric character 1
to 4094.
Error: Value (<value>) is out of range for Vlan ID. The valid
range is 1 to 4094.
The value of IGMP Snooping Querier VLAN ID is out of range.
Set IGMP Snooping Querier VLAN ID with numeric character 1
to 4094.
Error:IGMP ADMIN must be enabled.
IGMP ADMIN is not enabled.
IGMP ADMIN must be enabled before configuring the setting.
Error: There are no ports assignment.
There are no ports assigned to IGMP Multicast Static Group.
Assign ports to IGMP Multicast Static Group.
Error: You cannot define L2Mcast Group for these MAC
addresses from 01:00:5E:00:00:00 to 01:00:5E:00:00:FF
The reserved Multicast MAC addresses can not be set for IGMP
Multicast Static Group.
Create IGMP Multicast Static Group with non-reserved Multicast
MAC address.
Error: MAC Address requires a MAC address in form
01:00:5e:xx:xx:xx.
User input an invalid format or non-multicast MAC address for
IGMP Multicast Static Group setting.
Use the correct multicast MAC address for this function, MAC
address should be in 01:00:5e:xx:xx:xx format where range for x
is 0 - F.
Error: Failed to create MAC Filter.
ERROR: Filter already exists.
User create a IGMP Multicast Static Group, but the MAC
address is already configured in the system.
Use another multicast MAC address to create the new IGMP
Static Group.
2011 Fujitsu Technology Solutions
©