Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
6
Config FILENAME is not separated from FILENAME as we don't
need.
Unconbined configuration file is failed to separate.
The configuration file is wrong and need to be checked.
6
WDT Function init OK.
The watch dog timer is initialized successfully.
Watch dog timer is started by system.
6
ECC Error Detect Function init OK.
The ECC error detect task is initialized successfully.
The ECC error detect task is started by system.
6
ECC Error Detect Function init FAIL.
The initialization of ECC error detect task is failed.
Reboot the switch again.
6
Single-bit ECC error (0x%08x), interrupt counter = %d, capture
addr = 0x%08x
A single-bit ECC error is detected on <addr>.
There is a single-bit ECC error is detected. If it is possible, user
is recommended to replace the DDR-RAM module from switch.
6
Link Up: Unit: <unitId> Slot: <slotId> Port: <portNo>
The interface unit/slot/port is link up.
6
Link Down: Unit: <unitId> Slot: <slotId> Port: <portNo>
The interface unit/slot/port is link down.
2011 Fujitsu Technology Solutions
©