This section contains the Configuration Serial Port messages.
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error: Serial Port Timeout (minutes) formate is invaild.
User configure non-numeric characters for Serial Port Login
Timeout.
Use numeric characters to configure Serial Port Login Timeout.
Error: Value (<value>) is out of range for Serial Port Login
Timeout (minuter). The value range is 0 to 160.
The value of Serial Port Login Timeout is out of range..
The range for Serial Port Login Timeout is 0 to 160.
Error: Password Threshold formate is invalid.
User configure non-numeric characters for Password Threshold.
Use numeric characters to configure Password Threshold.
Error: Value (<value>) is out of range for Password Threshold.
The value of range is 0 to 120.
The value of Serial Port Login Timeout is out of range.
The range for Serial Port Login Timeout is 0 to 120.
Error: Silent Time (Sec) format is invalid.
User configure non-numeric characters for Silent Time.
Use numeric characters to configure Silent Time.
Error: Value (<value>) is out of range of range for Silent Time
(Sec). The vaild is 0 to 65535.
The value of Silent Time is out of range.
The range for Silent Time is 0 to 65535.
Error: value (<value>) is out of range Terminal Length. The valid
range is 10 to 100.
The value of Terminal Length is out of range or non-numeric
characters.
Use numeric characters and the range for Terminal Length is 10
to 100.
2011 Fujitsu Technology Solutions
©