Fujitsu Primergy BX900 System Message Manual page 187

Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Incorrect input! Use 'no capabilities {10|100|1000
half-duplex|full-duplex}'.
User input incomplete command.
Use 'no capabilities {10|100|1000 half-duplex|full-duplex}'.
Incorrect input! Use 'capabilities all {10|100|1000
half-duplex|full-duplex}'.
User input incomplete command.
Use 'capabilities all {10|100|1000 half-duplex|full-duplex}'.
Incorrect input! Use 'no capabilities all {10|100|1000
half-duplex|full-duplex}'.
User input incomplete command.
Use 'no capabilities all {10|100|1000 half-duplex|full-duplex}'.
Incorrect input! Use 'speed-duplex {10|100
half-duplex|full-duplex}'.
User input incomplete command.
Use 'speed-duplex {10|100 half-duplex|full-duplex}'.
Incorrect input! Use 'speed-duplex all {{100|10}
{half-duplex|full-duplex}'.
User input incomplete command.
Use 'speed-duplex all {{100|10} {half-duplex|full-duplex}'.
This function is not available to this port!!!
Only external ports can be changed speed. Internal ports always
fix on 1G speed.
User can't change the speed for the internal ports.
Incorrect input! This interface is a member of channel group.
User attempt to enable flowcontrol on a member port of channel
group.
User is not allowed to enable flow control on port-channel
member port. Please enable the flow control on the port-channel
interface.
Incorrect input! Use 'show interface status {<unit/slot/port> | all}'.
User input incomplete command .
Use 'show interface status {<unit/slot/port> | all}'.
2011 Fujitsu Technology Solutions
©