Fujitsu Primergy BX900 System Message Manual page 230
Blade server systems
ethernet connection blade module sb6 / sb11a / sb11 switch and ibp version
Hide thumbs
Also See for Primergy BX900:
- User manual (811 pages) ,
- Hardware reference manual (69 pages) ,
- Configuration manual (67 pages)
Table of Contents
Advertisement
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
The maximum Uplink Set is 30, please check the Uplink Set
setting.
ERROR: Uplink Set name <uplinkSetName> is not allowed to
delete.
User try to delete a Uplink Set that has associated with a Port
Group.
User should break association with the Port Group first, and then
delete the Uplink Set.
Incorrect input! Use 'show uplink-set [<uplinkSetName>]'.
Incomplete command for this function.
Use complete command 'show uplink-set [<uplinkSetName>]'.
ERROR: Could not set internal port <intIfNum> on Uplink Set
port.
User try to add an internal port to the Uplink Set.
Internal port doesn't support Uplink Set function. Internal port
should be configured as the member of Port Group, VLAN port
group, service LAN or service VLAN.
Error: Operation not possible - Port speed does not match LAG
speed or does not full-duplex.
User try to add an external port to the Uplink Set, but the speed
capability of the external port doesn't match the setting of this
Uplink Set member ports.
User should check the speed capability of the external port to
match the Uplink Set members.
Add interface <intIfNum> to Uplink Set <uplinkSetName> failure!
User try to add an external port to the Uplink Set, but the
member port of the Uplink Set has reached the maximum (8
ports).
User should move one member out of the Uplink Set, and then
add this external port to the Uplink Set.
2011 Fujitsu Technology Solutions
©
Advertisement
Table of Contents
