Fujitsu Primergy BX900 System Message Manual page 112

Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
Severity Level
Error Message
Explanation
Recommended Action
6
Unit <unit-id> attached successfully
The unit attached successfully to the stack.
The unit is attached to the stack system and it is ready for
operation.
6
EDB Callback: Unit Join: <unit-id>
The unit is detected by the switch and updated to its database.
A notification message for the new detected unit.
6
EDB Callback: Unit Leave: <unit-id>
The unit is removed from the stack due to the hardware is
removed or the stacking cable is removed.
A notification message for user that a unit is removed.
1
Standby taking over as Manager of the Stack, reason: <reason>
The standby unit has been taken over the master role due to the
reason.
A notification message for user that a master is lost and standby
unit take over as Manager of the stack.
4
Unit <unit-id> active image version does not match with
Manager. Ports on this unit will not be operational.
A new unit can't be joined the stack due to the code version
mismatched.
Image upgrade operation is recommended for the new unit.
5
Management unit conflict was detected and this unit has won the
manager election. All the units attached to losing Stack Manager
%x:%x:%x:%x:%x:%x will reset and join this Manager.
Two stack masters in a stack, the current stack master won the
master role and will still be the manager of this stack. All the
units of the losing stack master will be reset and join back the
stack later.
Please refer to the power consideration sequences of a stack to
prevent two stack masters in the same stack at the same time.
2011 Fujitsu Technology Solutions
©