NEUTRAL START INTERLOCK (NSI)
INSTALLATION / ADJUSTMENT
1. Shift into "NEUTRAL" position.
2. Install the NSI cable in the recoil starter, clutch notch plate,
and the cable bracket.
3. Loosen the adjustment nut 3.
4. Turn the adjustment nut to align the center 1 of the cam
with the match mark 2 on the recoil starter case.
5. Pull the recoil starter and make sure that the starter does
not work when the shift lever is in "FORWARD" and "RE-
VERSE" position.
6. Tighten the adjustment nut.
7. Apply Suzuki Water Resistant Grease to inner cable, cable
end, and cam.
99000-25160 : Suzuki Water Resistant Grease
If the NSI cable is removed or left without correct ad-
justment, there is a high risk of losing one's balance
and /or being thrown overboard if the motor starts in
gear.
RECOIL STARTER 6-9
Cam