Disassembly / Reassembly - Suzuki DF 25 Service Manual

DISASSEMBLY / REASSEMBLY

DISASSEMBLY
NOTE:
For correct assembly, scribe an alignment mark on each part
of fuel pump.
Remove six screws 1 and remove in sequence the outer plate
2, diaphragm 3 and valve body 4.
Turn piston 6 until pin 5 comes out through cutaway of pump
body 0.
Remove following parts :
• Pin 5
• Piston 6
• Spring 7
• Diaphragm 8
• Spring 9
ASSEMBLY
Assembly is reverse order of disassembly with special atten-
tion to the following steps.
NOTE:
After connecting diaphragm rod 8 to piston 6 with pin 5 , align
the six diaphragm holes to pump body holes by turning pis-
ton 6 and diaphragm 8 together. Turning them together pre-
vents the pin from coming out through pump body 0 cutaway.
FUEL SYSTEM 5-15
0
7
5
6
2
3
4
8
9
1