Suzuki DF 25 Service Manual page 203

8-24 MID UNIT
CLAMP BRACKET
Insert PORT and STBD bushings 2 into the swivel bracket 1.
Install clamp bracket 3, 4 and clamp bracket shaft 5 to swivel
bracket 1.
Install clamp bracket shaft nut 6. Leave nut loose for easier
installation of PTT unit (or gas assist tilt cylinder).
99000-25160 : Suzuki Water Resistant Grease
NOTE:
Before installing clamp bracket to swivel bracket, apply grease
to clamp bracket shaft and bushings.
Install PTT unit assembly (or gas assist tilt cylinder) in position
between clamp brackets.
• For Gas assist tilt cylinder installation, see page 8-7 to 8-8.
• For PTT unit installation, see page 9-10 to 9-11.
Tighten clamp bracket shaft nut 6 to specified torque.
Clamp bracket shaft nut :
43 N . m (4.3 kg-m, 31.0 lb.-ft.)