MAINTENANCE AND TUNE-UP PROCEDURES
This section describes the servicing procedures for each of
the periodic maintenance requirements.
ENGINE OIL / ENGINE OIL FILTER
ENGINE OIL LEVEL CHECK
Inspect oil level before every use.
(1) Place the outboard motor upright on a level surface.
(2) Remove the motor cover.
(3) Remove the oil level dipstick and wipe it clean.
(4) Insert it fully into the dipstick hole, then remove it to check
oil level.
(5) Oil level should be between the full level line (Max.) and
low level line (Min.)
If the level is low, add recommended oil to full level line.
Recommended oil :
• 4 stroke motor oil
• API classification
SE, SF, SG, SH, SJ.
• Viscosity rating
SAE 10 W-40.
PERIODIC MAINTENANCE 2-3
1 Oil level dipstick
2 Oil filler cap
Full level
line
Low level
line
30