Suzuki DF 25 Service Manual page 88

4-18 ELECTRICAL
ASSEMBLY
Assembly is reverse of disassembly with special attention to fol-
lowing steps.
When installing armature, exercise care to avoid break-
ing brushes.
Apply grease to armature shaft and shaft holes.
99000-25010 : Suzuki Super Grease "A"
Align the notch in the cover (Front & Rear) with the tab on the
stator when assembling.
Wear safety grasses when disassembling and reassem-
bling stopper ring.
Install pinion, spring, pinion stopper and stopper ring.
NOTE:
Make sure stopper ring 1 fit tightly in pinion stopper 2 and
armature shaft 3 .
3 – 4.5N . m
(0.3 – 0.45kg . m)
1
2
3